3dprintersonlinestore is online portal for personal and professional 3d printers. They are selling
3d printers from the top brand manufacturers to Global customers. We would like to present an overview of one of the best 3d printer from 3dprintersonlinestore. Geeetech Me Ducer. It is 6th generation of geeetech 3d printers. Perfect 3d printer for Home and office purpose. Small in size and weight, easy to carry anywhere like laptop. generation of geeetech 3d printers. Perfect 3d printer for Home
1 Comment
Little particles on the Inside Corners I’m not sure what to call this phenomena, but basically little particles form on the inside corner(s) of your print and create a little worm-like structure along with some stringing. The example pictured on the right is printed with the same settings as you would choose for a vase: zero infill, zero top layers. However, there is an additional structure in the middle of the part. Solution: In Slic3r configuration under Print Settings > Infill , uncheck “Only retract when crossing perimeters.” What happens is Slic3r thinks that the nozzle is still within a filled layer even though infill is set to zero, and doesn’t recognize that you want two clean and distinct boundaries. REMOVING A PART FROM YOUR PRINT BED Problem: “I can’t remove my part from the build platform.” Sometimes, a part can be stuck to the print surface really well and you’re unable to get good leverage to pop it off. When printing a pyramid shape, it’s even difficult to get at it with conventional tools. Here are a few tips:
What is the diffrent between 0.1mm and 0.2mm layer height ?
here is the result . I zoom in with DIY microlens + iphone 5s this actual size is around 2cm. PRINTING LARGE OR UNIQUELY SHAPED PARTS If you need to make parts larger than the printing area of your printer or parts that have intricate projections, here are a few choices in order of popularity:
Problem: “The dimension of my part in X (or Y) is suddenly under-spec.” -or- “The sides of my round object are flat.” If your printer was known to be printing with dimensions within tolerance (meaning the settings in the firmware are good) and all of sudden parts are measuring smaller, check the tension of your drive belt. Loose belts will require the motor pulley to need to take up this little bit of slack before the extruder/print bed gets moved. This results in parts being undersized. If for some reason you have difficulties tightening your belt, try printing and attaching one of these nifty little S-clips (Thing:10082). |
Archives
August 2023
Categories |