B3D-ONLINE 3D PRINTING MALAYSIA
  • HOME
  • Solutions
    • 3D DESIGN
    • 3D Printing Solution
    • 3D Printer Build for Business
  • Printing gallery
  • Blog&News
  • Our Story
  • Join US
  • ☆ Contact us ☆

What Material I can use for 3D Printing?

18/12/2022

0 Comments

 
There are many different materials that can be used for 3D printing, and the specific materials available will depend on the type of 3D printer you are using. Some common 3D printing materials include:
  1. Plastics: Many 3D printers use plastic filaments, such as ABS (acrylonitrile-butadiene-styrene) or PLA (polylactic acid), as their primary printing material. These materials are widely available and relatively inexpensive, but may not be as durable or heat-resistant as some other materials.
  2. Metals: Some 3D printers are capable of printing with metal materials, such as aluminum, brass, or steel. These materials can be more expensive and require specialized equipment, but after post processing it can produce strong and precise parts with good surface finish.
  3. Resins: Some 3D printers use resin materials, which are cured with UV light to create solid parts. Resin materials can produce high-quality parts with fine details, but can be more expensive and require special handling and post-processing.
  4. Ceramics: Some 3D printers are capable of printing with ceramic materials, which can produce strong and heat-resistant parts. Ceramic materials can be more difficult to work with and may require specialized equipment and post-processing.
  5. Other materials: There are many other materials that can be used for 3D printing, such as wood, rubber, and composites. These materials may be more specialized and may require specialized equipment or post-processing.

It is important to consider the properties and limitations of different 3D printing materials when selecting one for your project. You should also consider factors such as cost, availability, and compatibility with your 3D printer.

If you looking for 3D Printing service and advice can contact us for more.

0 Comments

    Archives

    December 2022
    August 2021
    May 2020
    April 2020
    March 2020
    January 2020
    December 2019
    November 2019
    October 2019
    July 2019
    May 2019
    April 2019
    February 2019
    January 2019
    November 2018
    September 2018
    August 2018
    June 2018
    May 2018
    April 2018
    April 2017
    February 2016
    January 2016
    December 2015
    September 2015
    August 2015
    July 2015
    June 2015
    May 2015
    April 2015
    March 2015
    December 2014

    RSS Feed

    Categories

    All

    The best home 3D printer of 2020
B3D-ONLINE (AKA Build 3D online) Presented by B&C Digital Fabrication Solution (002906447-D).  Founded By Bruce Mui . Click for T&C.
  • HOME
  • Solutions
    • 3D DESIGN
    • 3D Printing Solution
    • 3D Printer Build for Business
  • Printing gallery
  • Blog&News
  • Our Story
  • Join US
  • ☆ Contact us ☆